{"id":2638,"date":"2026-07-24T06:04:09","date_gmt":"2026-07-24T06:04:09","guid":{"rendered":"https:\/\/www.zmsh-semitech.com\/?post_type=product&p=2638"},"modified":"2026-07-24T06:04:11","modified_gmt":"2026-07-24T06:04:11","slug":"custom-fused-quartz-fixture-ring-with-radial-support-ribs","status":"publish","type":"product","link":"https:\/\/www.zmsh-semitech.com\/cs\/product\/custom-fused-quartz-fixture-ring-with-radial-support-ribs\/","title":{"rendered":"Prstenec sv\u00edtidla z taven\u00e9ho k\u0159emene na m\u00edru s radi\u00e1ln\u00edmi v\u00fdztu\u017en\u00fdmi \u017eebry"},"content":{"rendered":"

Spole\u010dnost ZMSH vyr\u00e1b\u00ed na zak\u00e1zku upev\u0148ovac\u00ed krou\u017eky z taven\u00e9ho k\u0159emene pro za\u0159\u00edzen\u00ed na v\u00fdrobu polovodi\u010d\u016f, syst\u00e9my pro tepeln\u00e9 zpracov\u00e1n\u00ed polovodi\u010dov\u00fdch desti\u010dek a dal\u0161\u00ed aplikace s vysok\u00fdmi teplotami, u nich\u017e je kladen d\u016fraz na \u010distotu.<\/p>\n

Sou\u010d\u00e1st se skl\u00e1d\u00e1 z velk\u00e9ho prstencov\u00e9ho k\u0159emenn\u00e9ho t\u011blesa s centr\u00e1ln\u00edm otvorem a n\u011bkolika radi\u00e1ln\u00edmi v\u00fdztu\u017en\u00fdmi \u017eebry. \u017debrovan\u00e1 konstrukce je navr\u017eena tak, aby zvy\u0161ovala tuhost a rozkl\u00e1dala mechanick\u00e1 zat\u00ed\u017een\u00ed, p\u0159i\u010dem\u017e zachov\u00e1v\u00e1 otev\u0159enou vnit\u0159n\u00ed strukturu. Vn\u011bj\u0161\u00ed pr\u016fm\u011br, vnit\u0159n\u00ed pr\u016fm\u011br, celkov\u00e1 tlou\u0161\u0165ka, uspo\u0159\u00e1d\u00e1n\u00ed \u017eebrov\u00e1n\u00ed, mont\u00e1\u017en\u00ed otvory a polohovac\u00ed prvky lze vyrobit podle v\u00fdkres\u016f z\u00e1kazn\u00edka.<\/p>\n

Ka\u017ed\u00e9 za\u0159\u00edzen\u00ed je p\u0159ed zah\u00e1jen\u00edm v\u00fdroby posouzeno z hlediska provozn\u00ed teploty, teplotn\u00edch cykl\u016f, zat\u011b\u017eovac\u00edch podm\u00ednek, rozhran\u00ed s ostatn\u00edmi za\u0159\u00edzen\u00edmi a po\u017eadavk\u016f na \u010distotu.<\/p>\n

Technick\u00e9 parametry produktu<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Polo\u017eka<\/th>\nDostupn\u00e9 specifikace<\/th>\n<\/tr>\n
N\u00e1zev produktu<\/td>\nKruhov\u00e9 sv\u00edtidlo z taven\u00e9ho k\u0159emene<\/td>\n<\/tr>\n
Zna\u010dka<\/td>\nZMSH<\/td>\n<\/tr>\n
Materi\u00e1l<\/td>\nTaven\u00fd k\u0159emen<\/td>\n<\/tr>\n
Struktura<\/td>\nPrstencov\u00fd krou\u017eek s radi\u00e1ln\u00edmi op\u011brn\u00fdmi \u017eebry<\/td>\n<\/tr>\n
Vn\u011bj\u0161\u00ed pr\u016fm\u011br<\/td>\nNa m\u00edru<\/td>\n<\/tr>\n
Vnit\u0159n\u00ed pr\u016fm\u011br<\/td>\nNa m\u00edru<\/td>\n<\/tr>\n
Celkov\u00e1 tlou\u0161\u0165ka<\/td>\nNa m\u00edru<\/td>\n<\/tr>\n
Po\u010det \u017eeber<\/td>\nPodle v\u00fdkresu z\u00e1kazn\u00edka<\/td>\n<\/tr>\n
Rozm\u011bry \u017eeber<\/td>\n\u0160\u00ed\u0159ka, v\u00fd\u0161ka a poloha lze p\u0159izp\u016fsobit<\/td>\n<\/tr>\n
Stav povrchu<\/td>\nPr\u016fhledn\u00e9, pr\u016fsvitn\u00e9 nebo matn\u00e9<\/td>\n<\/tr>\n
Zpracov\u00e1n\u00ed hran<\/td>\nBrou\u0161en\u00e9, zkosen\u00e9, zaoblen\u00e9 nebo le\u0161t\u011bn\u00e9<\/td>\n<\/tr>\n
Dal\u0161\u00ed funkce<\/td>\nMont\u00e1\u017en\u00ed otvory, polohovac\u00ed otvory, \u0161t\u011brbiny, dr\u00e1\u017eky a stupn\u011b<\/td>\n<\/tr>\n
Plochost<\/td>\nPodle v\u00fdkresu a \u017e\u00e1dosti<\/td>\n<\/tr>\n
Rozm\u011brov\u00e1 tolerance<\/td>\nV z\u00e1vislosti na velikosti sou\u010d\u00e1sti a technick\u00fdch po\u017eadavc\u00edch<\/td>\n<\/tr>\n
V\u00fdrobn\u00ed metody<\/td>\nTvarov\u00e1n\u00ed k\u0159emene, sva\u0159ov\u00e1n\u00ed, brou\u0161en\u00ed a p\u0159esn\u00e9 obr\u00e1b\u011bn\u00ed<\/td>\n<\/tr>\n
Kontrola<\/td>\nKontrola rozm\u011br\u016f, vzhledu a \u010distoty<\/td>\n<\/tr>\n
Balen\u00ed<\/td>\nSamostatn\u00e9 ochrann\u00e9 nebo \u010dist\u00e9 balen\u00ed<\/td>\n<\/tr>\n
Minim\u00e1ln\u00ed objedn\u00e1vkov\u00e9 mno\u017estv\u00ed<\/td>\nObvykle 50 kus\u016f; mno\u017estv\u00ed pro v\u00fdvoj podl\u00e9h\u00e1 potvrzen\u00ed<\/td>\n<\/tr>\n
Dodac\u00ed lh\u016fta<\/td>\nP\u0159ibli\u017en\u011b 2\u20134 t\u00fddny<\/td>\n<\/tr>\n
Platebn\u00ed podm\u00ednky<\/td>\nT\/T<\/td>\n<\/tr>\n
M\u00edsto p\u016fvodu<\/td>\n\u0160anghaj, \u010c\u00edna<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Kone\u010dn\u00e9 specifikace se stanov\u00ed po posouzen\u00ed v\u00fdkresu sou\u010d\u00e1sti a provozn\u00edch podm\u00ednek.<\/p>\n

Hlavn\u00ed vlastnosti produktu<\/h2>\n

Prstencov\u00e1 konstrukce s radi\u00e1ln\u00edm vyztu\u017een\u00edm<\/h3>\n

Velk\u00fd st\u0159edov\u00fd otvor a radi\u00e1ln\u00ed uspo\u0159\u00e1d\u00e1n\u00ed \u017eeber poskytuj\u00ed praktickou konstrukci pro upevn\u011bn\u00ed za\u0159\u00edzen\u00ed, kter\u00e1 vy\u017eaduj\u00ed otev\u0159en\u00fd procesn\u00ed prostor. Po\u010det, \u0161\u00ed\u0159ku, v\u00fd\u0161ku a rozte\u010d \u017eeber lze p\u0159izp\u016fsobit podle po\u017eadovan\u00fdch op\u011brn\u00fdch bod\u016f a rozlo\u017een\u00ed zat\u00ed\u017een\u00ed.<\/p>\n

Skute\u010dn\u00fd mechanick\u00fd v\u00fdkon z\u00e1vis\u00ed na rozm\u011brech sou\u010d\u00e1sti, zp\u016fsobu upevn\u011bn\u00ed, provozn\u00ed teplot\u011b a p\u016fsob\u00edc\u00edm zat\u00ed\u017een\u00ed.<\/p>\n

N\u00edzk\u00e1 tepeln\u00e1 rozta\u017enost<\/h3>\n

Taven\u00fd k\u0159emen m\u00e1 n\u00edzk\u00fd koeficient tepeln\u00e9 rozta\u017enosti, co\u017e pom\u00e1h\u00e1 za\u0159\u00edzen\u00ed zachovat rozm\u011brovou stabilitu b\u011bhem cykl\u016f zah\u0159\u00edv\u00e1n\u00ed a ochlazov\u00e1n\u00ed. Tato vlastnost je u\u017eite\u010dn\u00e1 p\u0159i tepeln\u00fdch procesech v polovodi\u010dov\u00e9m pr\u016fmyslu, kde m\u016f\u017ee doch\u00e1zet k opakovan\u00fdm zm\u011bn\u00e1m teploty.<\/p>\n

Kompatibilita s vysokoteplotn\u00edmi procesy<\/h3>\n

Taven\u00fd k\u0159emen se hojn\u011b pou\u017e\u00edv\u00e1 v polovodi\u010dov\u00fdch pec\u00edch a za\u0159\u00edzen\u00edch pro tepeln\u00e9 zpracov\u00e1n\u00ed, proto\u017ee si zachov\u00e1v\u00e1 dobrou stabilitu p\u0159i vysok\u00fdch teplot\u00e1ch.<\/p>\n

Maxim\u00e1ln\u00ed vhodn\u00e1 provozn\u00ed teplota z\u00e1vis\u00ed na druhu k\u0159emene, geometrii up\u00ednac\u00edho prvku, p\u016fsob\u00edc\u00edm zat\u00ed\u017een\u00ed, procesn\u00ed atmosf\u00e9\u0159e a teplotn\u00edm cyklu.<\/p>\n

Chemick\u00e1 odolnost<\/h3>\n

Taven\u00fd k\u0159emen vykazuje odolnost v\u016f\u010di mnoha kyselin\u00e1m a procesn\u00edm chemik\u00e1li\u00edm pou\u017e\u00edvan\u00fdm v polovodi\u010dov\u00e9m pr\u016fmyslu a v laboratorn\u00edm prost\u0159ed\u00ed. Chemickou kompatibilitu je v\u0161ak t\u0159eba ov\u011b\u0159it s ohledem na konkr\u00e9tn\u00ed procesn\u00ed plyny, kapaliny a \u010distic\u00ed prost\u0159edky.<\/p>\n

N\u00edzk\u00fd potenci\u00e1l kontaminace<\/h3>\n

K\u0159emen se b\u011b\u017en\u011b pou\u017e\u00edv\u00e1 v polovodi\u010dov\u00fdch za\u0159\u00edzen\u00edch, proto\u017ee jej lze dod\u00e1vat s kontrolovanou kvalitou materi\u00e1lu a \u010dist\u00fdm povrchem. Zp\u016fsob \u010di\u0161t\u011bn\u00ed a \u00farove\u0148 balen\u00ed lze specifikovat podle zam\u00fd\u0161len\u00e9ho procesu.<\/p>\n

P\u0159izp\u016fsoben\u00ed pomoc\u00ed kreslen\u00ed<\/h3>\n

Na rozd\u00edl od standardn\u00edch k\u0159emenn\u00fdch krou\u017ek\u016f lze tento prvek vyrobit tak, aby p\u0159esn\u011b odpov\u00eddal rozhran\u00ed za\u0159\u00edzen\u00ed. T\u011blo krou\u017eku, \u017eebra, otvory, dr\u00e1\u017eky, hrany i povrchov\u00e1 \u00faprava mohou b\u00fdt p\u0159izp\u016fsobeny po\u017eadavk\u016fm z\u00e1kazn\u00edka.<\/p>\n

Mo\u017enosti vlastn\u00edho n\u00e1vrhu<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Oblast designu<\/td>\nNastaviteln\u00e9 parametry<\/td>\n<\/tr>\n
T\u011blo prstenu<\/td>\nVn\u011bj\u0161\u00ed pr\u016fm\u011br, vnit\u0159n\u00ed pr\u016fm\u011br a celkov\u00e1 tlou\u0161\u0165ka<\/td>\n<\/tr>\n
Radi\u00e1ln\u00ed \u017eebra<\/td>\nMno\u017estv\u00ed, \u0161\u00ed\u0159ka, v\u00fd\u0161ka, d\u00e9lka, \u00fahel a rozestup<\/td>\n<\/tr>\n
Spojen\u00ed \u017eeber<\/td>\nSpojovac\u00ed poloha, polom\u011br p\u0159echodu a geometrie spoje<\/td>\n<\/tr>\n
Mont\u00e1\u017en\u00ed rozhran\u00ed<\/td>\nOtvory pro \u0161rouby, polohovac\u00ed otvory, dr\u00e1\u017eky a z\u00e1\u0159ezy<\/td>\n<\/tr>\n
Op\u011brn\u00e1 plocha<\/td>\nKontaktn\u00ed plocha, v\u00fd\u0161ka schodu a poloha op\u011brn\u00e9ho bodu<\/td>\n<\/tr>\n
Kontrola rozm\u011br\u016f<\/td>\nTolerance rovinnosti, kruhovitosti, soust\u0159ednosti a polohy<\/td>\n<\/tr>\n
Design hran<\/td>\nZkosen\u00e1 hrana, \u0161ikm\u00e1 hrana, zaoblen\u00e1 hrana nebo le\u0161t\u011bn\u00e1 hrana<\/td>\n<\/tr>\n
Stav povrchu<\/td>\nPr\u016fhledn\u00e9, pr\u016fsvitn\u00e9, le\u0161t\u011bn\u00e9 nebo matn\u00e9<\/td>\n<\/tr>\n
K\u0159emenn\u00fd materi\u00e1l<\/td>\nT\u0159\u00edda k\u0159emene zvolen\u00e1 podle po\u017eadavk\u016f v\u00fdrobn\u00edho procesu<\/td>\n<\/tr>\n
\u010ci\u0161t\u011bn\u00ed<\/td>\nStandardn\u00ed po\u017eadavky na \u00faklid nebo po\u017eadavky na \u00faklid specifick\u00e9 pro dan\u00fd projekt<\/td>\n<\/tr>\n
Balen\u00ed<\/td>\nIndividu\u00e1ln\u00ed balen\u00ed, \u010dist\u00e9 balen\u00ed nebo exportn\u00ed balen\u00ed<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Pokud je to mo\u017en\u00e9, je t\u0159eba se vyvarovat ostr\u00fdch vnit\u0159n\u00edch roh\u016f a n\u00e1hl\u00fdch zm\u011bn tlou\u0161\u0165ky, proto\u017ee mohou zvy\u0161ovat lok\u00e1ln\u00ed nap\u011bt\u00ed p\u0159i zah\u0159\u00edv\u00e1n\u00ed, manipulaci nebo mont\u00e1\u017ei.<\/p>\n

Typick\u00e9 aplikace<\/h2>\n

Na m\u00edru vyroben\u00e9 upev\u0148ovac\u00ed krou\u017eky z taven\u00e9ho k\u0159emene lze zv\u00e1\u017eit pro pou\u017eit\u00ed v:<\/p>\n

    \n
  • Za\u0159\u00edzen\u00ed pro v\u00fdrobu polovodi\u010d\u016f<\/li>\n
  • Syst\u00e9my pro tepeln\u00e9 zpracov\u00e1n\u00ed desti\u010dek<\/li>\n
  • Dif\u00fazn\u00ed pece<\/li>\n
  • Oxida\u010dn\u00ed pece<\/li>\n
  • Za\u0159\u00edzen\u00ed pro chemick\u00e9 nan\u00e1\u0161en\u00ed z plynn\u00e9 f\u00e1ze<\/li>\n
  • Sestavy k\u0159emenn\u00fdch pec\u00ed<\/li>\n
  • Syst\u00e9my pro uchycen\u00ed a polohov\u00e1n\u00ed desti\u010dek<\/li>\n
  • Vysokoteplotn\u00ed procesn\u00ed komory<\/li>\n
  • Laboratorn\u00ed za\u0159\u00edzen\u00ed pro tepeln\u00e9 zpracov\u00e1n\u00ed<\/li>\n
  • Optick\u00e9 a elektronick\u00e9 zpracov\u00e1n\u00ed materi\u00e1l\u016f<\/li>\n
  • Vlastn\u00ed v\u00fdrobn\u00ed p\u0159\u00edpravky pro polovodi\u010dov\u00fd pr\u016fmysl<\/li>\n<\/ul>\n

    Vhodnost je nutn\u00e9 ov\u011b\u0159it s ohledem na provozn\u00ed teplotu, procesn\u00ed atmosf\u00e9ru, zat\u00ed\u017een\u00ed, teplotn\u00ed cyklus a konstrukci za\u0159\u00edzen\u00ed.<\/p>\n

    V\u00fdrobn\u00ed proces<\/h2>\n

    1. Posouzen\u00ed v\u00fdkres\u016f a \u017e\u00e1dosti<\/h3>\n

    P\u0159ed vypracov\u00e1n\u00edm cenov\u00e9 nab\u00eddky se prov\u00e1d\u00ed kontrola v\u00fdkresu sou\u010d\u00e1sti, rozm\u011br\u016f, uspo\u0159\u00e1d\u00e1n\u00ed v\u00fdztu\u017en\u00fdch \u017eeber, toleranc\u00ed a provozn\u00edch podm\u00ednek. V t\u00e9to f\u00e1zi lze identifikovat oblasti s vysok\u00fdm tepeln\u00fdm nebo mechanick\u00fdm nam\u00e1h\u00e1n\u00edm.<\/p>\n

    2. V\u00fdb\u011br materi\u00e1lu a postupu<\/h3>\n

    Druh k\u0159emenn\u00e9ho materi\u00e1lu a zp\u016fsob v\u00fdroby se vol\u00ed podle velikosti up\u00ednac\u00edho p\u0159\u00edpravku, jeho konstrukce a po\u017eadavk\u016f na \u010distotu.<\/p>\n

    V z\u00e1vislosti na konstrukci m\u016f\u017ee v\u00fdroba zahrnovat tv\u00e1\u0159en\u00ed k\u0159emene, sva\u0159ov\u00e1n\u00ed, brou\u0161en\u00ed a p\u0159esn\u00e9 obr\u00e1b\u011bn\u00ed.<\/p>\n

    3. V\u00fdroba konstruk\u010dn\u00edch prvk\u016f<\/h3>\n

    Prstencov\u00e9 t\u011bleso, radi\u00e1ln\u00ed \u017eebra a dal\u0161\u00ed upev\u0148ovac\u00ed prvky jsou vyrobeny podle schv\u00e1len\u00e9ho v\u00fdkresu. Poloha \u017eeber a geometrie spoj\u016f jsou kontrolov\u00e1ny tak, aby byla zachov\u00e1na po\u017eadovan\u00e1 konstrukce.<\/p>\n

    4. \u00daprava hran a povrch\u016f<\/h3>\n

    Hrany mohou b\u00fdt brou\u0161en\u00e9, zkosen\u00e9, zaoblen\u00e9 nebo le\u0161t\u011bn\u00e9. Povrch m\u016f\u017ee b\u00fdt v z\u00e1vislosti na \u00fa\u010delu pou\u017eit\u00ed pr\u016fhledn\u00fd, pr\u016fsvitn\u00fd nebo matn\u00fd.<\/p>\n

    5. Kontrola a balen\u00ed<\/h3>\n

    Hotov\u00e9 sou\u010d\u00e1sti se p\u0159ed \u010di\u0161t\u011bn\u00edm a zabalen\u00edm do ochrann\u00e9ho obalu zkontroluj\u00ed podle sjednan\u00e9ho v\u00fdkresu a krit\u00e9ri\u00ed pro p\u0159evzet\u00ed.<\/p>\n

    Kontrola kvality<\/h2>\n

    Mezi dostupn\u00e9 polo\u017eky kontroly pat\u0159\u00ed:<\/p>\n

      \n
    • Vn\u011bj\u0161\u00ed pr\u016fm\u011br<\/li>\n
    • Vnit\u0159n\u00ed pr\u016fm\u011br<\/li>\n
    • Celkov\u00e1 tlou\u0161\u0165ka<\/li>\n
    • Kruhov\u00e1 soum\u011brnost<\/li>\n
    • Soust\u0159ednost<\/li>\n
    • Plochost<\/li>\n
    • Po\u010det a poloha \u017eeber<\/li>\n
    • \u0160\u00ed\u0159ka a v\u00fd\u0161ka \u017eebra<\/li>\n
    • Pr\u016fm\u011br a poloha otvoru<\/li>\n
    • Rozm\u011bry dr\u00e1\u017eek a z\u00e1\u0159ez\u016f<\/li>\n
    • Okrajov\u00e1 podm\u00ednka<\/li>\n
    • \u0160kr\u00e1bance na povrchu<\/li>\n
    • Od\u0161t\u011bpky a praskliny<\/li>\n
    • Vzhled svaru<\/li>\n
    • Vizu\u00e1ln\u00ed p\u0159ehlednost<\/li>\n
    • Stav obalu<\/li>\n<\/ul>\n

      Zpr\u00e1vy o rozm\u011brov\u00e9 kontrole, dokumentace k materi\u00e1lu a fotografie v\u00fdrobk\u016f lze poskytnout, jsou-li uvedeny v po\u017eadavc\u00edch objedn\u00e1vky.<\/p>\n

      \u00dadaje pot\u0159ebn\u00e9 pro vypracov\u00e1n\u00ed cenov\u00e9 nab\u00eddky<\/h2>\n

      Pro vypracov\u00e1n\u00ed p\u0159esn\u00e9 cenov\u00e9 nab\u00eddky a posouzen\u00ed proveditelnosti v\u00fdroby n\u00e1m pros\u00edm poskytn\u011bte:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Povinn\u00e9 \u00fadaje<\/td>\nPopis<\/td>\n<\/tr>\n
      Technick\u00fd v\u00fdkres<\/td>\nPDF, DXF, DWG, STEP nebo jin\u00fd dostupn\u00fd form\u00e1t<\/td>\n<\/tr>\n
      Hlavn\u00ed rozm\u011bry<\/td>\nVn\u011bj\u0161\u00ed pr\u016fm\u011br, vnit\u0159n\u00ed pr\u016fm\u011br a celkov\u00e1 tlou\u0161\u0165ka<\/td>\n<\/tr>\n
      Konstrukce \u017eeber<\/td>\nPo\u010det \u017eeber, \u0161\u00ed\u0159ka, v\u00fd\u0161ka, d\u00e9lka a \u00fahlov\u00e1 poloha<\/td>\n<\/tr>\n
      Mo\u017enosti mont\u00e1\u017ee<\/td>\nDetaily otvor\u016f, dr\u00e1\u017eek, z\u00e1\u0159ez\u016f a polohovac\u00edch bod\u016f<\/td>\n<\/tr>\n
      Rozm\u011brov\u00e9 tolerance<\/td>\nKritick\u00e9 rozm\u011bry a polohov\u00e9 tolerance<\/td>\n<\/tr>\n
      Geometrick\u00e9 tolerance<\/td>\nRovinnost, kruhovitost, soust\u0159ednost a rovnob\u011b\u017enost<\/td>\n<\/tr>\n
      Po\u017eadavky na povrch<\/td>\nPr\u016fhledn\u00e9, pr\u016fsvitn\u00e9, le\u0161t\u011bn\u00e9 nebo matn\u00e9<\/td>\n<\/tr>\n
      Zpracov\u00e1n\u00ed hran<\/td>\nZkosen\u00ed, zaoblen\u00ed, \u0161ikm\u00e1 hrana nebo le\u0161t\u011bn\u00e1 hrana<\/td>\n<\/tr>\n
      Provozn\u00ed teplota<\/td>\nKontinu\u00e1ln\u00ed a \u0161pi\u010dkov\u00e1 teplota procesu<\/td>\n<\/tr>\n
      Tepeln\u00fd cyklus<\/td>\nPodm\u00ednky vyt\u00e1p\u011bn\u00ed a chlazen\u00ed<\/td>\n<\/tr>\n
      Podm\u00ednky nakl\u00e1dky<\/td>\nPovolen\u00e9 zat\u00ed\u017een\u00ed, sm\u011br zat\u00ed\u017een\u00ed a body styku<\/td>\n<\/tr>\n
      Procesn\u00ed prost\u0159ed\u00ed<\/td>\nPlynn\u00e9, chemick\u00e9, vakuov\u00e9 nebo atmosf\u00e9rick\u00e9 podm\u00ednky<\/td>\n<\/tr>\n
      Typ za\u0159\u00edzen\u00ed<\/td>\nPec, syst\u00e9m pro nan\u00e1\u0161en\u00ed vrstvy, procesn\u00ed komora nebo jin\u00e9 za\u0159\u00edzen\u00ed<\/td>\n<\/tr>\n
      Objedn\u00e1van\u00e9 mno\u017estv\u00ed<\/td>\nZku\u0161ebn\u00ed mno\u017estv\u00ed a odhadovan\u00e1 popt\u00e1vka po dan\u00e9 \u0161ar\u017ei<\/td>\n<\/tr>\n
      Po\u017eadavky na kvalitu<\/td>\nZpr\u00e1va o kontrole, certifik\u00e1t materi\u00e1lu a norma pro balen\u00ed<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Uveden\u00ed provozn\u00edch podm\u00ednek spolu s v\u00fdkresem pom\u00e1h\u00e1 posoudit, zda jsou uspo\u0159\u00e1d\u00e1n\u00ed \u017eeber, tlou\u0161\u0165ka st\u011bn a konstrukce spoj\u016f vhodn\u00e9 pro zam\u00fd\u0161len\u00fd proces.<\/p>\n

      Pro\u010d si vybrat k\u0159emenn\u00e9 komponenty na m\u00edru od spole\u010dnosti ZMSH?<\/h2>\n

      Spole\u010dnost ZMSH se zab\u00fdv\u00e1 v\u00fdrobou k\u0159emenn\u00fdch komponent\u016f podle v\u00fdkres\u016f pro polovodi\u010dov\u00e1 za\u0159\u00edzen\u00ed, laboratorn\u00ed syst\u00e9my a pr\u016fmyslov\u00e9 aplikace s vysok\u00fdmi teplotami.<\/p>\n

      N\u00e1\u0161 sortiment k\u0159emenn\u00fdch v\u00fdrobk\u016f na m\u00edru zahrnuje:<\/p>\n

        \n
      • K\u0159emenn\u00e9 upev\u0148ovac\u00ed krou\u017eky<\/li>\n
      • K\u0159emenn\u00e9 op\u011brn\u00e9 krou\u017eky<\/li>\n
      • K\u0159emenn\u00e9 \u0161ablony<\/li>\n
      • K\u0159emenn\u00e9 desky a kotou\u010de<\/li>\n
      • Nosi\u010de k\u0159em\u00edkov\u00fdch desti\u010dek<\/li>\n
      • Lod\u011b z k\u0159emene<\/li>\n
      • Trubky do k\u0159emenn\u00fdch pec\u00ed<\/li>\n
      • K\u0159emenn\u00e9 p\u0159\u00edruby<\/li>\n
      • K\u0159emenn\u00e9 komory<\/li>\n
      • Sestavy sva\u0159ovan\u00e9 z k\u0159emene<\/li>\n
      • Dal\u0161\u00ed zak\u00e1zkov\u00e9 polovodi\u010dov\u00e9 k\u0159emenn\u00e9 sou\u010d\u00e1stky<\/li>\n<\/ul>\n

        V r\u00e1mci procesu vypracov\u00e1n\u00ed nab\u00eddky m\u016f\u017eeme prov\u011b\u0159it v\u00fdkres, v\u00fdrobn\u00ed postup, rozm\u011brov\u00e9 po\u017eadavky, zp\u016fsob kontroly a po\u017eadavky na balen\u00ed.<\/p>\n

        \u010casto kladen\u00e9 ot\u00e1zky<\/h2>\n

        Lze vn\u011bj\u0161\u00ed a vnit\u0159n\u00ed pr\u016fm\u011br p\u0159izp\u016fsobit podle po\u017eadavk\u016f?<\/h3>\n

        Ano. Vn\u011bj\u0161\u00ed pr\u016fm\u011br, vnit\u0159n\u00ed pr\u016fm\u011br, tlou\u0161\u0165ka i celkov\u00e1 geometrie krou\u017eku mohou b\u00fdt vyrobeny podle v\u00fdkresu z\u00e1kazn\u00edka a rozhran\u00ed za\u0159\u00edzen\u00ed.<\/p>\n

        Lze zm\u011bnit po\u010det a rozm\u011bry radi\u00e1ln\u00edch \u017eeber?<\/h3>\n

        Ano. Po\u010det \u017eeber, jejich \u0161\u00ed\u0159ku, v\u00fd\u0161ku, rozte\u010d a \u00fahlovou polohu lze p\u0159izp\u016fsobit. N\u00e1vrh je t\u0159eba posoudit s ohledem na p\u0159edpokl\u00e1dan\u00e9 zat\u00ed\u017een\u00ed a provozn\u00ed teplotu.<\/p>\n

        M\u016f\u017eete vyrobit up\u00ednac\u00ed p\u0159\u00edpravek podle fyzick\u00e9ho vzorku?<\/h3>\n

        Reprodukce na z\u00e1klad\u011b vzorku m\u016f\u017ee b\u00fdt mo\u017en\u00e1. D\u016frazn\u011b se v\u0161ak doporu\u010duje vyhotovit technick\u00fd v\u00fdkres, aby bylo mo\u017en\u00e9 p\u0159esn\u011b stanovit kritick\u00e9 rozm\u011bry, tolerance a polohy v\u00fdztu\u017en\u00fdch \u017eeber.<\/p>\n

        Je tento prvek vyroben jako jeden kus, nebo jako sva\u0159ovan\u00e1 sestava?<\/h3>\n

        Zp\u016fsob v\u00fdroby z\u00e1vis\u00ed na velikosti prstence, struktu\u0159e \u017eeber, toleranc\u00edch a proveditelnosti v\u00fdroby. Tvarovan\u00e9, obr\u00e1b\u011bn\u00e9 a sva\u0159ovan\u00e9 konstrukce lze posoudit v r\u00e1mci posouzen\u00ed v\u00fdkres\u016f.<\/p>","protected":false},"excerpt":{"rendered":"

        Spole\u010dnost ZMSH vyr\u00e1b\u00ed na zak\u00e1zku upev\u0148ovac\u00ed krou\u017eky z taven\u00e9ho k\u0159emene pro za\u0159\u00edzen\u00ed na v\u00fdrobu polovodi\u010d\u016f, syst\u00e9my pro tepeln\u00e9 zpracov\u00e1n\u00ed polovodi\u010dov\u00fdch desti\u010dek a dal\u0161\u00ed aplikace s vysok\u00fdmi teplotami, u nich\u017e je kladen d\u016fraz na \u010distotu.<\/p>\n

        Sou\u010d\u00e1st se skl\u00e1d\u00e1 z velk\u00e9ho prstencov\u00e9ho k\u0159emenn\u00e9ho t\u011blesa s centr\u00e1ln\u00edm otvorem a n\u011bkolika radi\u00e1ln\u00edmi v\u00fdztu\u017en\u00fdmi \u017eebry. \u017debrovan\u00e1 konstrukce je navr\u017eena tak, aby zvy\u0161ovala tuhost a rozkl\u00e1dala mechanick\u00e1 zat\u00ed\u017een\u00ed, p\u0159i\u010dem\u017e zachov\u00e1v\u00e1 otev\u0159enou vnit\u0159n\u00ed strukturu. Vn\u011bj\u0161\u00ed pr\u016fm\u011br, vnit\u0159n\u00ed pr\u016fm\u011br, celkov\u00e1 tlou\u0161\u0165ka, uspo\u0159\u00e1d\u00e1n\u00ed \u017eebrov\u00e1n\u00ed, mont\u00e1\u017en\u00ed otvory a polohovac\u00ed prvky lze vyrobit podle v\u00fdkres\u016f z\u00e1kazn\u00edka.<\/p>","protected":false},"featured_media":2639,"comment_status":"open","ping_status":"closed","template":"","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[1212],"product_tag":[1706,1702,1709,1708,1703,1704,1705,1707],"class_list":{"0":"post-2638","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-semiconductor-consumables","7":"product_tag-custom-quartz-fixture","8":"product_tag-fused-quartz-fixture-ring","9":"product_tag-precision-quartz-machining","10":"product_tag-quartz-furnace-fixture","11":"product_tag-quartz-support-ring","12":"product_tag-radial-rib-quartz-ring","13":"product_tag-semiconductor-quartz-components","14":"product_tag-wafer-processing-quartz-parts","15":"desktop-align-left","16":"tablet-align-left","17":"mobile-align-left","18":"ast-product-gallery-layout-horizontal-slider","19":"ast-product-tabs-layout-horizontal","21":"first","22":"instock","23":"shipping-taxable","24":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product\/2638","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/comments?post=2638"}],"version-history":[{"count":2,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product\/2638\/revisions"}],"predecessor-version":[{"id":2644,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product\/2638\/revisions\/2644"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/media\/2639"}],"wp:attachment":[{"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/media?parent=2638"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product_brand?post=2638"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product_cat?post=2638"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.zmsh-semitech.com\/cs\/wp-json\/wp\/v2\/product_tag?post=2638"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}